SAE J1350 Selection and Application Guidelines for Diesel, Gasoline, and Propane Fired Liquid Cooled Engine Pre-Heaters
作者:标准资料网 时间:2024-05-09 00:06:51 浏览:8985
来源:标准资料网
Product Code:SAE J1350
Title:Selection and Application Guidelines for Diesel, Gasoline, and Propane Fired Liquid Cooled Engine Pre-Heaters (STABILIZED Nov 2011)
Issuing Committee:Common Tests Technical Steering Committee
Scope:This information report covers fuel fired pre-heaters which burn gasoline, diesel, or propane fuels. This type of heater must be used in remote areas where 110/220 V, 60 Hz electric power is not available, and is recommended anywhere an on-board self-contained system is required. The guidelines in this report are applicable, but not limited to, fuel burning heater installations on the off-road self-propelled work machine described in SAE Recommended Practice J1116.
Product Code:SAE J2289
Title:Electric Drive Battery Pack System Functional Guidelines
Issuing Committee:Electric Vehicle Forum Committee
Scope:This SAE Information Report describes common practices for design of battery systems for vehicles that utilize a rechargeable battery to provide or recover all or some traction energy for an electric drive system. It includes product description, physical requirements, electrical requirements, environmental requirements, safety requirements, storage and shipment characteristics, and labeling requirements. It also covers termination, retention, venting system, thermal management, and other features. This document does describe guidelines in proper packaging of the battery to meet the crash performance criteria detailed in SAE J1766. Also described are the normal and abnormal conditions that may be encountered in operation of a battery pack system--PurposeThis document provides the guidelines for designing a battery system to package into manufacturer脮s electric drive vehicles. It lays the foundation for electric vehicle battery systems and provides information to assist in developing a robust battery system.--Field of ApplicationThis document applies to vehicles using electrically rechargeable storage traction batteries that provides energy and power to an electric drive system for propulsion, namely Electric Vehicles and some Hybrid Electric Vehicles.This document does not fully address all guidelines for mechanically rechargeable battery systems. Users of mechanically recharged batteries should evaluate applicability of individual sections of this document.--Product ClassificationThe battery system is a vehicle subsystem that provides all or some of the traction power and energy for vehicles using electric drive systems.This document does not apply to low voltage non-traction battery supply systems.Product DescriptionA battery system is the complete set of assemblies required to supply traction power and energy to an electric vehicle drive system. A battery pack is a single assembly with batteries that is part of a Battery System. In some cases a single pack may comprise the complete Battery System.Electric Drive vehicles may require an electrically rechargeable secondary battery to provide motive traction power and energy as well as power and energy for incidental loads like power steering, heating and air conditioning, FMVSS mandated exterior lighting, controls, customer convenience features, etc. The battery can also represent a significant physical load to the vehicle in terms of mass, volume, and controls complexity. Consequently, the battery exerts a significant factor in vehicle design.【英文标准名称】:TestMethodsforDrying,CuringorFilmFormationofOrganicCoatingsatRoomTemperature
【原文标准名称】:室温下有机涂料干燥,固化及成膜试验方法
【标准号】:ASTMD1640-1983
【标准状态】:作废
【国别】:美国
【发布日期】:1983
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:环境温度;涂层;试验;干燥;有机的;后养护
【英文主题词】:ambienttemperatures;organic;drying;coatings;aftercare;testing
【摘要】:
【中国标准分类号】:G50
【国际标准分类号】:87_040
【页数】:4P;A4
【正文语种】:英语
